Model NO.: | S81 S100B S121 S188 SFD13 | Core: | Plate |
---|---|---|---|
Frame Material: | Carbon, SS304, SS316 | Trademark: | DGXT OR OEM |
Transport Package: | Plywood Case | Specification: | Stainless Steel SS316L/0.5 |
Origin: | China | HS Code: | 84195000 |
Port: | Shanghai, China | Production Capacity: | 100000pieces/Year |
Certification: | CE, ISO, UL | Application: | Heater, Cooler |
Principle: | Recuperative Heat Exchanger | Style: | Plate Type |
Material: | Stainless Steel | Gasket: | EPDM/NBR |
Heat Exchanger Specification:
Material of Plate | Suited Liquid Kinds | ||
Stainless Steel (AISI304.316 Etc) | Pure Water, Normal Water, Oil for eating, Mineral Oil | ||
Ti, Ti-pd | Sea Water, Saline Water, Mineral Water | ||
20Cr, 18Ni, 6Mo (254SMO) | Dilute Sulphuric Acid, Organic Water Solution | ||
Ni | High-temp and concentration caustic soda,sodium hydroxide | ||
Hastelloy (C276, D205, B2G) | Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid | ||
Material of Gasket | Operating Temperature ° C | Suited Liquid Kinds | |
NBR | -15~+110° C | Water, Sea Water, Mineral Oil, Salinous Water | |
HT-NBR | -15~+120° C | Water, Sea Water, Mineral Oil, Salinous Water | |
HNBR | -15~+140ºC | High temperature mineral oil, high temperature water | |
EPDM | -25~+160° C | Hot Water, Steam, Acid, Alkali,sodium hydroxide | |
HEPDM | -25~+180° C | Hot water, water vapor, acid, alkali,sodium hydroxide | |
Viton-A | -5~+160° C | Acid, Alkali Acid, alkali, fluid,sodium hydroxide | |
Viton-G | -5~+180° C | High Concentrated Acid, Alkali, High temperature Oil, Steam |
Work principle
Fluid A passes from the port on the left of the heat exchanger through every other channel created by the plates to the opposite end port on the left of the heat exchanger (looking at it the long way).
Corrosion
Corrosion is usually how these units will fail. Use fluids with reasonable pH levels to ensure a long lasting life. Hard water will corrode faster than regular water. (Use distilled if possible;
Application
Refrigeration system
Evaporator
Condenser
Economizer and desuperheaters
Air drier
Heat pump
Absorption chiller
HVAC
Radiant floor
Provide all of the following model
D-Sondex Plate Heat Exchanger Model |
|||||
Detachable Sondex plate heat exchanger specification | |||||
Model | Connection | surface/plate | Plate QTY | QMAX | Surface max |
DN | m2 | No. | T/H | m2 | |
D-S7 | 50 | 0.07 | 76 | 40 | 5 |
D-S14 | 50 | 0.15 | 427 | 40 | 59 |
D-S17 | 50/65 | 0.19 | 609 | 40 | 100 |
D-S18 | 50/62.5 | 0.19 | 609 | 65 | 115 |
D-S21 | 100 | 0.22 | 698 | 180 | 146 |
D-S22 | 100 | 0.26 | 538 | 165 | 118 |
D-S41 | 150 | 0.45 | 670 | 380 | 274 |
D-S42 | 150 | 0.46 | 532 | 360 | 223 |
D-S62 | 150 | 0.68 | 670 | 380 | 415 |
D-S43 | 200 | 0.46 | 695 | 700 | 300 |
D-S65 | 200 | 0.68 | 695 | 700 | 450 |
D-S100 | 200 | 1 | 695 | 700 | 695 |
D-S130 | 200 | 1.3 | 695 | 700 | 900 |
D-S80 | 300 | 0.8 | 930 | 1600 | 744 |
D-S81 | 300 | 0.84 | 930 | 1600 | 750 |
D-S120 | 300 | 1.2 | 930 | 1600 | 1115 |
D-S188 | 300 | 1.88 | 930 | 1600 | 1750 |
300 | 1.88 | 930 | 1600 | 2210 | |
D-S250 | 300 | 2.51 | 930 | 1600 | 2334 |
D-S200 | 500 | 2.06 | 930 | 4000 | 1860 |
The Table are Sondex Commonly type Pressure Up to 2.5Mpa | |||||
Frame type:IS,IT,FT,IG,FS,FG,IC |