Phosphate Liquid Cooling Plate Heat Exchanger, Corrosion Resistant 316L Stainless Steel Plate Heat Exchanger

Heat Exchanger Plate Material Choose reference:

Plate matrial	Adapt Liquid
Stainless steel(304,316)	Pure water,stem water,Edible oil,mineral oil
(Ti,Ti-Pa)	Sea water,Salt water,Salt compounds
20Cr,18Ni,6Mo(2455Mo)	Dilute sulfuric acid, dilute sulfate, organic water solution
(Ni)	High Temperature and High Concentration Caustic Sodium
HASTELLOY(C276,D25,B2G)	Concentrated sulfuric acid, hydrochloric acid and phosphoric acid

Heat Exchanger Plate gaskets Material Choose reference:

Sealing material:	adapt temperature	Suitable for fluid
NBR	-15~+120ºC	Water, sea water, cooking oil, salt water
HNBR	-15~+140ºC	High temperature mineral oil, high temperature water
EPDM	-25~+170ºC	Hot water, water vapor, acid, alkali
Viton	-5~+130ºC	Acid, alkali, fluid

We Supply all kinds of heat exchanger replacement plate and gaskets service,completed machine service.
including Gea, Apv, Funke, Hisaka, Muller, Sondex, Thermowave, etc

Function of a Plate Heat Exchanger
A plate Heat Exchanger is a unit which transfers heat continuously from one media to another media without adding energy to the process. The basic concept of a plate and frame Heat Exchanger is two liquids flowing on either side of a thin corrugated metal plate so heat may be easily transferred between the two.

The plate Heat Exchanger efficiency requires less floor space compared to other types of Heat Transfer equipment and is lighter in weight.

Design of a Plate Heat Exchanger
The plate Heat Exchanger is designed with either single-pass or multi-pass flow, depending on the duty. For most duties single-pass is suitable and often the preferred solution as it keeps all connections on the stationary frame part and consequently makes disassembly easier. Multi-Pass however, is required when flow rates are low or when approach temperatures are close. Other factors such as building ceiling height or space limitations for handling of large plates often leads to the decision to use multi-pass and thereby more and smaller plates.

Types of a Plate Heat Exchangers

Paraflow Plate Heat Exchangers
The Paraflow is the original plate type Heat Exchanger designed by APV to provide maximum efficiency and cost effectiveness in handling a wide variety of Heat Transfer applications.

ParaBrazed Plate Heat Exchangers
ParaBrazed Heat Exchangers are a compact, cost effective unit designed to deliver high thermal efficiency while maintaining lower pressure drops. It's the perfect choice for many single and two phase Heat Transfer applications for industrial and refrigeration duties.

Advanges of Plate Heat Exchangers
Easy to Remove and Clean

Plate Heat Exchangers are easy to clean by remove the tie bolts and slide back the movable frame part. Then the plate pack can be inspected, pressure cleaned, or removed for refurbishment if required.

Expandable

A very significant feature of the plate Heat Exchanger is that it is expandable. Increasing the Heat Transfer requirements means simply adding plates instead of buying a new Heat Exchanger, saving time and money.

High Efficiency

Because of the pressed patterns in the plates and the relative narrow gaps, very high turbulence is achieved at relative low fluid velocity. This combined with counter directional flow results in very high Heat Transfer coefficients.

Compact Size

As a result of the high efficiency, less Heat Transfer area is required, resulting in a much smaller Heat Exchanger than would be needed for the same duty using other types of Heat Exchangers. Typically a plate Heat Exchanger requires between 20-40% of the space required by a tube and shell Heat Exchanger.

Close Approach Temperature

The same features that give the plate Heat Exchanger its high efficiency also makes it possible to reach close approach temperatures which is particularly important in heat recovery and regeneration applications. Approach temperatures of 0.5°C is possible.

Multiple Duties in a Single Unit

The plate Heat Exchanger can be built in sections, separated with simple divider plates or more complicated divider frames with additional connections. This makes it possible to heat, regenerate, and cool a fluid in one Heat Exchanger or heat or cool multiple fluids with the same cooling or heating source.

Less Fouling

Very high turbulence is achieved as a result of the pattern of the plates, the many contact points, and the narrow gap between the plates. This combined with the smooth plate surface reduces fouling considerably compared to other types of Heat Exchangers.

Lower Costs

High Heat Transfer coefficients mean less Heat Transfer area and smaller Heat Exchangers, and sometimes even less Heat Exchanger.

Features and benefits

Experience the benefit of an individually customized solution that perfectly matches your requirements and lowers your energy consumption.
High performance for a low pressure drop eliminates unnecessary burdens on your system and optimizes overall system performance.
The design results in a compact solution with a small footprint, simple installation, and easy access for maintenance.

Applications

HVAC industry - e.g. district cooling solutions using seawater and groundwater as cooling source - e.g. district heating solutions using, for example, solar and geothermal energy as heating source
Marine/offshore industry - e.g. central and lubrication oil cooling
Dairy/food/beverage industry - e.g. pasteurization, heat recoveries, and duties that require gentle treatment
Sugar industry
Biogas industry
Pulp and paper industry
Heavy industry
Mining industry
Petrochemical industry
Chemical industry - e.g. waste heat recovery from condenser water

Place of Origin:	China
Brand Name:	DGXT
Certification:	FDA CE
Model Number:	Customized

Minimum Order Quantity:	1
Price:	1000USD
Packaging Details:	wooden case
Delivery Time:	8-10 days
Payment Terms:	TT
Supply Ability:	1000 per month

Origin:	China	HS Code:	84195000
Port:	Shanghai, China	Application:	Heater, Cooler
Principle:	Recuperative Heat Exchanger	Style:	Plate Type
Material:	Stainless Steel	After-sale Service:	Online Support

	ShangHai TengBao Heat Exchanger Co,.ltd
	Add: Room 1003, room 300, No. 61, Tao Pu Road, Putuo District, Shanghai
	86-139-21853220
	jeey-zhu@dg-xintuo.com