|Flow Media:||Water Food Juice Milk Oil Gas Acid||Gasket Material:||EPDM, NBR, Viton, HNBR|
|Application:||Heater, Cooler, Vaporizer, Condenser||Principle:||Recuperative Heat Exchanger|
|Sealing material:||adapt temperature||Suitable for fluid|
|NBR||-15~+120ºC||Water, sea water, cooking oil, salt water|
|HNBR||-15~+140ºC||High temperature mineral oil, high temperature water|
|EPDM||-25~+170ºC||Hot water, water vapor, acid, alkali|
|Viton||-5~+130ºC||Acid, alkali, fluid|
|Plate material||Applicable fluids|
|Stainless steel(SU304.316 ect)||Clean water, river water, edible oil, mineral oil|
|Stainless steel & Ti, Ti-Pd||Sea water, salty water,salt compounds|
|20Cr, 18Ni,SMO||Dilute sulfuric acid,Water solution of salt matter,
|Nickel||High temperature and high concentration of caustic soda|
|Hastelloy||Concentrated sulfuric acid,Hydrochloric acid, Phosphoric acid|
The plate heat exchanger used for food pasteurization procedure is consists of a pack of corrugated metal plates with port holes for the passage of two fluids between which heat transfer will take place. The plate pack is assembled between a frame plate and a pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the channel and directs the fluids into alternate channels. The number of plates are determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure.
The plates and the pressure plate are located by an upper bar and a lower bar, both of which are fixed to the support column. On the largest type some tightening bolts are equipped with ball bearing washers in order to facilitate opening and closing of the unit. The frame is designed for mounting on a floor only. Standard feet are fixed. One unit can contain several sections, separated by connection plates with interchangeable connections.
The corrugation of the plates provides a passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer. Corner ports and gaskets are arranged so that the two media flow through alternate channels. The plates have a chevron pattern for maximum strength at high working pressures. Different chevron designs are available, in order to obtain optimal high heat transfer and low pressure drop. A unique distribution area provides an even flow over the plate surface. The plates are reversible and have parallel flow, which means only one type of plate is needed.
High thermal efficiency
DGXT heat exchangers provide highly efficient heat transfer thanks to our unique thin plates with optimized chevron pattern, pressing depths and plate material. This provides more efficient and uniform heat transfer as well as uniform distribution of product across the entire surface of the plate. BAODE plates are available in a wide range of designs and sizes.
Easy cleaning and easy to service
DGXT plate heat exchangers come with features that make cleaning and service easy. Small ports, for example, make Cleaning-In-Place (CIP) possible without requiring the use of specialized pumps. Another great feature is our unique glue-less gasket system using FDA-compliant materials. Gaskets can easily be replaced while plates still hang on the frame, which saves both time and money.
Cooling and heating of dairy, brewery, beverage and viscous products
And milk pasteurization and pasteurization in some applications
Short delivery time.
Know-how design and customer support
Made in china